Order Online for Pick-up In-Store or Delivery
Osmo Wood PolyX-Oil High Solid - Raw
NEARLY INVISIBLE PROTECTION WITH NO COLOUR CHANGE
Osmo Polyx-Oil 3051 Raw is designed to retain an untreated appearance on light coloured woods such as Oak, Ash, Birch and Maple. Neutralises the permanent ‘wet-look’ that develops after the application of a clear oil-based finish and keeps the wood looking raw and untreated.
- Based on renewable raw materials – soybean, sunflower, thistle oil, and carnauba and candelilla wax
- High solid content – offers 2-3x the coverage of conventional wood finishes
- Extremely durable and hard-wearing – will not crack, flake or peel
- Water resistant – suitable for kitchens, bathrooms, and other rooms exposed to high humidity
- Can be spot-repaired and refreshed without sanding
- Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water according to DIN 68861-1A
- Safe for humans, animals and plants and is suitable for children’s toys as per EN 71.3
- Made in Germany – Conforms to strict German and European norms
- Easily applied with a brush, roller, buffing pad, or cloth
SPECIFICATIONS
Approx. Coverage: 258ft²/L (24m²/L) / per coat
Number of Coats: 2 coats
Application Temp.: +5°C to 35°C
Approx. Dry Time: 8-10hrs.
Sizes: 5mL, 0.125L, 0.750L, 2.5L
APPLICATION INSTRUCTIONS
By Hand with Fleece Applicator Pads
Apply 2-3 thin coats with our fleece applicator pads (best way to ensure you avoid over-application).
- Stir the Polyx®-Oil well and pour into tray
- Work the product into the wood thinly and evenly using the fleece applicator pad
- Be sure to thinly and evenly coat the surface
- Allow approx. 8-10 hours drying time. Allow for good ventilation whilst drying
- Apply second coat and third coats following previous steps.
Cure Period: Osmo Polyx-Oil(s) like all finishes have a cure period. We recommend allowing 2-3 weeks for the surface to fully cure and harden prior to damp-mopping or placing rugs/mats on the surface.
With a Brush or Roller
First Coat: Apply one thin coat with an Osmo Floor Brush or Osmo Floor Roller. Our rollers have a 4.5mm nap.
- Stir the Polyx®-Oil well and prior to use
- Brush or roll the product thinly and evenly onto the floor.
- Do not remove excess product, this will absorb into the wood surface over the drying period
- Allow 8-10 hours drying time prior to proceeding to second coat
Second Coat: Roll or Brush a thin second coat
- Brush or roll the second coat thinly and evenly onto the floor
- Allow approximately 5-10 minutes for product to penetrate surface
- Allow 8-10 hours drying time. Allow for good ventilation whilst drying.
Third Coat: Usually a third coat is not required, however highly absorbent or dry timbers may appear to require a third coat.
Please consult OSMO technical support at 1-844-OSMOCAN prior to carrying out a third coat
NOTE: For high quality finishes on items like tabletops, a smoother result can be achieved by lightly sanding the surface after the second coat has fully dried with P320 or P400 grit sandpaper, and then buffing in 1-2 coats with a cloth or white pad.
Cure Period: Osmo Polyx-Oil(s) like all finishes have a cure period. We recommend allowing 2-3 weeks for the surface to fully cure and harden prior to damp-mopping or placing rugs/mats on the surface.
By Hand with a Cloth/Rag
Apply 4-6 thin coats with a lint-free microfibre cloth. ie. Osmo Easy Pads.
- Stir the Polyx®-Oil well and prior to use
- Work product into wood using cloth in a circular or figure 8 pattern
- Allow roughly 15-minutes for oils to penetrate
- Working with the grain, remove all excess product from surface
- Allow 8-10 hours drying time prior to recoating
- Apply subsequent coats following previous steps
NOTE: Depending upon the species of wood (ie. Walnut) it may not be possible to achieve full durability and stain resistance when applying with a cloth. If high durability is required (ie. Floors and Tabletops) we suggest to apply the coating using the Brush or Roller technique.
Cure Period: Osmo Polyx-Oil(s) like all finishes have a cure period. We recommend allowing 2-3 weeks for the surface to fully cure and harden prior to damp-mopping or placing rugs/mats on the surface.
WARNING: Cloths saturated with product are a spontaneous combustion hazard and should be left out unfolded until dried, prior to disposal or preferably stored in a proper fireproof container.
